How to Clean a Keyboard
Sponsored Links:
When someone else types on your keyboard, those germs transfer to their fingers. Or when you later type on the same keyboard, those germs reconquer your fingers. Regularly disinfecting the keyboard can prevent this. To disinfect the keyboard, turn off the computer. Then spray disinfectant on a cloth. Be sure to use disinfectant and not just any type of cleaner because not all cleaners disinfect. Also do not spray the disinfectent directly on the keys. Spray it on the cloth. Wipe down the top and sides of the keys. Give the keys a few minutes to dry off before turning the computer back on.
When it comes to cleaning your keyboard there are many methods that can be used, some harder and more effective than others
The easiest method is the Shake Method. It is so easy that you can do it right now. Pick up your keyboard, turn it over being careful not to press any keys, and shake it. See all of that stuff fall out? It is dirtier than you thought, isn’t it? You can use one of the following methods to clean it further.
The Blow Method – You can buy cans of pressurized air at the computer department or computer store which are made especially for cleaning your computer. They usually have either a hose and nozzle or a tube extending from the nozzle. Hold the keyboard up vertically (that means that end of the keyboard is up and the other end is down), aim towards the keys and press the button. Keep blowing until all of the debris is blown out. Be sure to get around and in between all of the keys. This can be done with the computer on, but it is better if it is off so that you do not have to worry about pressing the keys and coming up with a page of aaaaaaaaaaaaaaaaaaaaa’s.
The Vacuum Method – This is just like the Blow Method except that a vacuum is used instead of a can of pressurized air. It is quite simple. Just turn the vacuum on, pull out the hose, and run the nozzle over the keys. Before doing this make sure your keyboard does not have any loose pop off keys that could be sucked into the vacuum.
The Cotton Ball Method – This can be done in addition to the above methods and in lieu of the following methods. Take a cotton ball or cloth and wet it with rubbing alcohol. It should not be so wet that the alcohol runs down into the cracks of the keyboard. Wipe the tops and sides of the keys.
The Dishwasher Method – I hesitate to tell about this method because there is the possibility that it could fry your keyboard. When I had less experience with computers, I dunked my keyboard in a sink full of water to clean it. It did work afterwards, so I don’t doubt those who say this method will not mess up your keyboard, but if it does, don’t complain to me. I warned you. If your keyboard is not the standard membrane type of keyboard or if it is on a laptop, do not even think of trying this
Related posts:
- How to Clean the Plasma Screen The screen of the plasma is therefore polishes, therefore I polish that they stretch to enough often obtain some digital powder or prints them. The...
- Cordless Keyboard And Mouse The world is moving faster than ever and we're all scrambling to keep up with it. Everything is interconnected through the internet, I mean everything....
- Methods For Keeping Contacts Clean For people that have just began to wear contact lenses, there is sometimes a concern about the proper way to keep their lenses clean. While...
- Registry Cleaners Are Able To Provide Numerous Advantages Registry cleaners provide some useful benefits and are basically a set of software applications that can be used to resolve certain Windows operating system problems....
- What You Didn’t Know About Registry Cleaners What is a registry cleaner and why is there such a big hype about them when people are talking about trying to make their computers...
Tagged as : clean, how to, keyboard, vacuum,
Incoming search engine terms:
